Categories

System glitches and false alarms can be aggravating, and even more concerning, could prevent your home’s security from doing its job effectively. Thankfully, most problems, from false alarms to dead batteries, are simple to correct. Take a look at our recommendations for troubleshooting your home alarm system in Fayetteville. We’ll help you keep your family safe and your system operating as it should.

Test Your Home Security System In Fayetteville

One of the most effective ways to troubleshoot your property’s defense is to test it! Modern systems have a test mode so you don’t accidentally initiate an emergency call. After moving to test mode, follow these steps:

• Turn on your system as you typically would when you head out.
• Open a door or window that uses a contact sensor, or try to set off another sensor. Close the door or window once you’re done so it doesn’t trigger the alarm as you turn the system back on.
• Permit the alarm to go off for 60 seconds to make sure a transmission is delivered to the security company and an entry is made in the alarm activity log.
• Continue testing devices as needed
• Check the system activity log to validate proper function.

Don’t worry, monitoring specialists can tell that your alarm system is involved in a test. Be sure to turn test mode off when done. It’s smart to test monthly or whenever you adjust your home’s internet or phone connectivity.

Evaluate The Position And Condition Of Motion Detectors

Although an integral part of your alarm system, motion detectors are notorious for false alarms. Do your part to prevent them with some simple troubleshooting.

• Perform a physical check. Are there things that could move within the sensor’s detection range, like drapery taken by a breeze?
• Is the sensor dirty? Cobwebs, dirt, and grime can result in issues. Ensure the device is clean.
• Does the motion detector come with pet immunity you can turn on? Some sensors can be configured to ignore pets weighing up to 100 pounds.
• When was the battery changed? Low batteries can affect performance or result in false alarms.
• Is a heat source affecting the sensor? Excessive heat from sunlight or a fireplace can trigger an alarm.

Keep Batteries On Hand And Look Out For Low Battery Notifications

One of the great advantages of new home security systems is that they’ll tell you when batteries are dying. If your system has a mobile app or control panel, you’ll typically find messages there. Depending on your alarm, you could notice an intermittent beep when batteries are low. 

Contact sensors, smoke detectors, motion sensors, and other wireless components have batteries that should be replaced every 1 to 2 years. It’s wise to keep batteries on hand and set a replacement schedule. Some systems also come with a backup battery for the primary control panel. This backup battery helps keep your system functioning if you have a power outage and should charge back up once power is restored. If it doesn’t, you should replace it.

Troubleshooting Is Effortless With ADT Home Security In Fayetteville 

As the leading name in home security, ADT designs systems that supply unrivaled functionality and protection. Accessing test mode is simple through MyADT.com or the ADT+ app, and you’ll always receive notifications when a battery is low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system ideal for your Fayetteville home and family. Place a call to (910) 275-4051 or fill out our form today!